Two Wire Controllers

Operational Features

The MCI100S has been designed to operate as

either a standalone irrigation controller or run

from a PC using Heron’s "Ground Control” software.

• Run up to 15 irrigation programs.

• Valve times down to 1 second can be set.

• Valves can be individually named.

• Run up to 8 valves in parallel (8 zones).

• Valve times can be set in minutes and seconds or hours and minutes.

• Up to 60 automatic starts can be set on either a daily or weekly basis.

• Customize your programs to balance water flow or match your special requirements.

• Irrigation times across all programs can be temporarily increased or decreased by a given percentage.

• Rainfall can be monitored and automatically reduce watering.
  Controlled cycling of irrigation programs.