Multi Wire Controllers

Operational Features

 

 

 

 

 

 

• Menu driven with a four line alphanumeric display.

• Valves can be individually named. Valves can be placed  in any order within an irrigation program.

• 15 Irrigation programs and 60 automatic starts.

• Automatic starts can be set on either a daily or weekly basis and any automatic start can start any program. 

• Up to 4 valves can run in parallel within a program or up to 4 irrigation programs can run in parallel.

• Valve times can be set in minutes and seconds or hours and minutes.

• The control of each program can be individually specified. For example, a program can be configured to ignore the manual percentage adjust facility.

• Rainfall can be monitored and automatically reduce watering by a given percentage.

• Back flush facility for filters.

• Continual cycling of up to 8 programs. Cycling can  be controlled by a combination of time and/or light energy.  The cycling program can be assigned as having priority over other irrigation programs.

• Fertigation option to support the dosing of feed.

• With the addition of a flow meter, the controller can  check that the water flow rate is within a specified range for each valve and log the volume of water used.

• Operate as either a standalone irrigation controller or run from a PC using Heron’s  "Ground Control” software.

• With the addition of the Heron Mobile Module controllers can be operated remotely via a mobile phone and text messages can be sent on alarm conditions.