Heron

 

 

 

Multi Wire Controllers
Operational features
Hardware Features

Multi Wire Controllers

 Hardware Features

 

  • Two pump start outputs.

  • Operate 24 Volt AC or DC valves.

  • Output current 1.3 Amps (resistive) with electronic overload cut-out

  • Remote start input , remote stop input and flow meter input

  • One socket for connecting a range of interface boards to integrate the controller with sensors, additional switched inputs and Heron’s dose controller. One serial connection to attach a PC.

  • MCI-96 will operate up to 96 valves with the addition of an Output Box and Expansion Cards.

  • Designed to operate in an industrial environment. High electrical noise immunity, can withstand a 2.5KV spike.

  • All outputs protected against electrical surges exceeding  ANSI C62 surge suppression standards.