Two Wire Battery Powered Controllers

Hardware Features

 

 

 

 

 

 

 

• The decoders are able to store charge which makes operation of latching solenoids at remote distances ultra reliable.

• Decoders are fail safe and will switch off the solenoid valve even if the cable breaks or power is lost to the controller.

• Operates 6V, 12V and 24V latching solenoid valves.

• Connect up to 60 valves on a single cable.

• The two wire cable path can have any number of spurs or loops.

• Latching decoders are fully water proof.

• The Controller is housed in a lockable splash proof (IP65) enclosure.

• Controller includes a lead acid battery that is charged from the solar panel. Alternatively the controller can be run from a 12V DC supply.

• Decoders have their own surge protection circuitry built-in.

• Mobile phone remote control.

• Integration with a range of sensors, including a flow meter and a rain gauge.

• Data stored in permanent memory.

• Pump decoders enable pumps to be controlled locally or remotely to the controller.

• Pump starts are optically isolated to protect against lightning surges.

• The controller is equipped with a unique lightning surge suppression system. Conforms to ANSI C62 surge suppression standards.